TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 324 of 1434
TM 9-2320-366-34-2 6-8. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT (CONT) b. Installation CAUTION Due to position of main housing module connector, extreme care must be taken when installing transmission adapter cable assembly connector. Failure to comply may result in damage to equipment. (1) Position transmission adapter cable assembly (1) in main housing module receptacle (2) with bolt (3). (2) Tighten bolt (3) to 12-24 lb-in. (1-3 N·m). (3) Remove nut (4) and washer (5) from transmission adapter cable assembly (1). (4) Install transmission adapter cable assembly (1) on bracket (6) with washer (5) and nut (4). (5) Connect transmission external wiring harness connector (7) to transmission adapter cable assembly (1). c. Follow-on Maintenance Operate vehicle and verify proper transmission operation (TM 9-2320-366-10-1). End of Task. 6-44