TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 323 of 1434
TM 9-2320-366-34-2 6-8. TRANSMISSION ADAPTER CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools/Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) a. Removal. (1) Disconnect transmission external wiring harness connector (1) from transmission adapter cable assembly (2). (2) Remove nut (3), washer (4), and transmission adapter cable assembly (2) from bracket (5). (3) Install washer (4) and nut (3) on transmission adapter cable assembly (2). (4) Loosen bolt (6) on transmission adapter cable assembly (2). (5) Remove transmission adapter cable assembly (2) from main housing module receptacle (7). 6-43