TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 318 of 1434
TM 9-2320-366-34-2 6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 28, Appendix B) Tool Kit, Genl Mech (Item 78, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Ties, Cable Plastic (Item 92, Appendix C) Nut, Self-Locking (Item 206, Appendix F) a. Removal. NOTE • Tag connectors and connection points prior to disconnecting. • Remove plastic cable ties as required. (1) Disconnect transmission external harness (1) from bulkhead receptacle J119 (2). (2) Disconnect transmission external harness (1) from throttle position sensor (3). 6-38