TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 315 of 1434
TM 9-2320-366-34-2 (53) Position strap (57) on starting motor solenoid terminal (58) and field coil screw (4). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (54) Apply sealing compound to threads of starting motor solenoid terminal (58) and field coil screw (4). (55) Position nut (59) on field coil screw (4). (56) Tighten nut (59) to 18-22 lb-ft (24-30 N·m). (57) Position nut (60) on starting motor solenoid terminal (58). (58) Tighten nut (60) to 21-29 lb-ft (28-39 N·m). (59) Position preformed packing (61), isolator (62), two washers (63), spring washers (64), nut (65), electrical lead (66), and nut (65) on contact screw (19). (60) Tighten two nuts (65) to 33-37 lb-ft (45-50 N·m). Change 1 6-36.15/(6-36.16 Blank)