TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 309 of 1434
TM 9-2320-366-34-2 (10) Lift spring (15) and install brush (16) in brush plate (12). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (11) Apply sealing compound to threads of screws (17). (12) Install screw (17) in brush plate (12). (13) Perform steps (10) through (12) on remaining brushes. (14) Apply sealing compound to threads of four screws (18). (15) Install contact screw (19) on brush plate (12) with four screws (18). (16) Install two washers (20), insulation washer (21), preformed packing (22), and sealing ring (23) on contact screw (19). Change 1 6-36.9