TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 298 of 1434
TM 9-2320-366-34-2 6-6. STARTING MOTOR REPAIR (P/N M0017703ME) (CONT) NOTE Note position of spring washers prior to removal. (2) Remove nut (5), electrical lead (3), nut (5), two spring washers (6), washers (7), isolator (8), and preformed packing (9) from contact screw (10). Discard spring washers and preformed packing. (3) Remove nut (11) from starting motor solenoid terminal (12). (4) Remove nut (13) and strap (14) from field coil screw (15). (5) Remove two screws (16) from starting motor solenoid (17). CAUTION Bendix must be moved to the engagement position before the starting motor solenoid can be rotated. Failure to comply may result in damage to equipment. (6) Rotate starting motor solenoid (17) so mounting bracket is turned up. (7) Remove starting motor solenoid (17) from shift housing (18). 6-34 Change 1