TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 292 of 1434
TM 9-2320-366-34-2 6-4. FUEL SHUTOFF SOLENOID REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Gen Mech (Item 78, Appendix B) Tool Kit, Intl. Comb. Eng. (TM 9-2320-366-20) Pan, Drain (Item 43, Appendix B) Wrench, Torque, 0-75 lb-in. (Item 98, Appendix B) Materials/Parts Lockwasher (2) (Item 163, Appendix F) Seal, Connector Tube (Item 377, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Antifreeze (Item 11, Appendix C) WARNING Ensure engine is cool before performing maintenance. Failure to comply may result in injury to personnel. a. Removal. (1) Open radiator drain cock (1) and drain [approximately 15 to 20 qt (14 to 19 L)]. (2) Disconnect compressor inlet coolant tube (2) from thermostat housing (3). 6-28 Change 1