TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 290 of 1434
TM 9-2320-366-34-2 6-3. STARTING MOTOR REPAIR (P/N M0017730MD) (CONT) NOTE Hold the shift housing end up for installation of solenoid. (37) Position starting motor solenoid (46) in shift housing (25). (38) Rotate starting motor solenoid (46) so mounting bracket is facing down. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (39) Apply sealing compound to threads of two screws (47). (40) Position two screws (47) in starting motor solenoid (46). (41) Tighten two screws (47) to 20-24 lb-ft (27-32 N·m). (42) Position strap (48) on starting motor solenoid terminal (49) and starting motor terminal (50). (43) Apply sealing compound to threads of starting motor solenoid terminal (49) and starting motor terminal (50). (44) Position nut (51) on starting motor terminal (50). (45) Tighten nut (51) to 18-22 lb-ft (24-30 N·m). (46) Position nut (52) on starting motor solenoid terminal (49). (47) Tighten nut (52) to 21-29 lb-ft (28-39 N·m). 6-26