TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 284 of 1434
TM 9-2320-366-34-2 6-3. STARTING MOTOR REPAIR (P/N M0017730MD) (CONT) NOTE Replace brush housing frame if continuity is not present between pin A and B of thermostat switch. (8) Check continuity between pin A and pin B of thermostat switch connector (10). NOTE Replace brush housing if brush holder or brush springs fail visual inspection. (9) Check brush holder (11) for cracks, pitting, or corrosion. (10) Check brush springs (12) for cracks, nicks, breaks, or distortion. NOTE Replace brush housing if continuity is present between brush housing terminal and brush housing frame. (11) Check continuity between brush housing terminal (13) and brush housing frame (14). NOTE Replace starting motor if shift housing, lever, cams, or pin fail visual inspection. (12) Inspect shift housing (15) for cracks, pitting, or corrosion. (13) Inspect lever (16) for cracks, pitting, or corrosion. (14) Inspect two cams (17) and pin (18) for cracks, pitting, or corrosion. 6-20