TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 273 of 1434
TM 9-2320-366-34-2 (21) Install two washers (24) and field leads (25) on front housing (7) with two nuts (26). (22) Position fan guard (27) on end housing (19) with four washers (28) and screws (29). (23) Tighten four screws (29) to 65 lb-in. (7 N•m). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush with water and get immediate medical attention. Failure to comply may result in injury to personnel. (24) Apply sealing compound to threads of two screws (30). (25) Position voltage regulator (31) on stator (12) with two lockwashers (32) and screws (30). (26) Tighten two screws (30) to 65 lb-in. (7 N•m). (27) Connect connector (33) to voltage regulator (31). 6-9