TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 268 of 1434
TM 9-2320-366-34-2 6-2. 100 AMP ALTERNATOR REPAIR (CONT) CAUTION Nuts securing field leads and coil leads are not interchangeable. Tag field lead nuts during removal. Failure to comply may result in damage to equipment. NOTE Tag coil leads and connection points prior to disconnecting. (9) Remove six nuts (25), coil leads (26), and washers (27) from front housing (9). (10) Match mark end housing (21) to stator (17). (11) Remove nine self-locking nuts (28) and end housing (21) from stator (17). Discard self-locking nuts. (12) Remove bearing (29) from shaft (3). (13) Remove three screws (30), lockwashers (31), and washers (32) from rotor (33). Discard lockwashers. (14) Install three jacking screws in small threaded holes on rotor (33). (15) Remove rotor (33) from shaft (3) by alternately turning three jacking screws two full turns. (16) Remove three jacking screws from rotor (33). 6-4