TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 235 of 1434
TM 9-2320-366-34-2 (20) Remove four locknuts (36) from turbocharger (9). Discard locknuts. (21) Remove turbocharger (9) and gasket (37) from exhaust manifold (38). Discard gasket. b. Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. CAUTION Ensure all openings of replacement turbocharger are covered with wiping rags. Remove coverings as connections are made. Failure to comply may result in damage to equipment. (1) Apply antiseize compound to threads of exhaust manifold studs (1). (2) Position turbocharger (2) and gasket (3) on exhaust manifold (4) with four locknuts (5). (3) Tighten four locknuts (5) to 36-44 lb-ft (49-60 N m). 4-27