TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 230 of 1434
TM 9-2320-366-34-2 4-5. FUEL TIMING CHECKS (CONT) (5) Remove bolt and timing fixture from inlet manifold (4). (6) Remove timing bolt (3) from timing hole on front of flywheel housing (2). NOTE Use bolt on front of alternator to rotate crankshaft and timing bolt installation. (7) Rotate crankshaft to the right one complete revolution. CAUTION Crankshaft must always be rotated to right to align timing bolt with flywheel. Do not rotate crankshaft to left for alignment. Failure to comply may result in damage to equipment. NOTE If timing bolt alignment is not obtained on first revolution, crankshaft must be rotated two complete revolutions before installing timing bolt. (8) Install timing bolt (3) in timing hole on front of flywheel housing (2). (9) Perform steps (4) through (8) on remaining injectors on this stroke. (10) Remove timing bolt (3) from timing hole on front of flywheel housing (2). (11) Install plug (1) in timing hole on front of flywheel housing (2). 4-22