TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 226 of 1434
TM 9-2320-366-34-2 4-5. FUEL TIMING CHECKS This task covers: a. Fuel Timing Checks b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Valve cover removed (TM 9-2320-366-20-3). Fuel setting check completed (para 4-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tools and Special Tools (Cont) Tool Kit, Intl. Comb. Eng. (TM 9-2320-366-20) Wrench, Torque, 0-60 N·m (Item 96, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Personnel Required (2) a. Fuel Timing Checks. CAUTION Crankshaft must always be rotated to right to align timing bolt with flywheel. Failure to comply may result in damage to equipment. NOTE Use bolt on front of alternator to rotate crankshaft for timing bolt installation. (1) Rotate crankshaft to the right two complete revolutions. (2) Remove plug (1) from timing hole on front of flywheel housing (2). NOTE • Steps (3) through (8) requires the aid of an assistant. • Mark damper to engine front cover when timing bolt engages with flywheel. (3) Install timing bolt (3) in timing hole on front of flywheel housing (2). 4-18