Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 223 of 1434

TM 9-2320-366-34-2 NOTE Perform steps (19) through (22) if dial indicator reading indicates adjustment of fuel setting is required. (19) Loosen locking nut (20) on fuel setting screw (21). (20) Adjust fuel setting screw (21) to obtain specified fuel setting. CAUTION Do not loosen screw which holds clamp assembly to control shaft. Failure to comply may result in damage to equipment. (21) Hold fuel setting screw (21) in position while tightening locking nut (20). (22) Check fuel setting by pushing down on rack lever (18) and quickly releasing. (23) Verify correct fuel setting. If fuel setting is not correct, repeat steps (19) through (22). (24) Remove holding tool and insertion tool from fuel governor (12). 4-15