TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 217 of 1434
TM 9-2320-366-34-2 CAUTION Do not overtighten locking nuts. Failure to comply may result in damage to threads. (26) Tighten locking nut (15) while holding fuel setting screw (16). (27) Check adjustment by repeating steps (14) through (16). (28) If indicator does not indicate +0.01 to +0.05 mm, repeat steps (21) through (26). (29) Remove dial indicator group from cylinder head (3). (30) Install bolt (7) where dial indicator group was installed. NOTE When synchronizing more than one fuel injector, apply consistent pressure on rack assembly from one fuel injector to the next to ensure accurate dial indicator readings. (31) Perform steps (1) through (30) on all injectors being synchronized. NOTE Perform step (32) if fuel setting is known to be incorrect. (32) Perform fuel setting check (para 4-4). 4-9