TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 214 of 1434
TM 9-2320-366-34-2 4-3. FUEL INJECTOR SYNCHRONIZATION (CONT) (4) Remove three push rods (5) from cylinder head (3). CAUTION Injector spring compressor must be installed on all fuel injectors that have rocker arms removed. Failure to comply may result in internal damage to fuel injector. (5) Install injector spring compressor on No. 1 fuel injector (4). (6) Lightly tap injector spring compressor with a soft face hammer. NOTE If injector rack does not move freely, repeat steps (5) and (6). (7) Check for free movement of injector rack bar (6). NOTE Perform steps (3) through (7) on all fuel injector(s) to be synchronized. (8) Remove bolt (7) from inlet manifold (8), nearest to fuel injector to be synchronized. CAUTION Ensure end face of injector rack bar is clean. Failure to comply may result in faulty reading. (9) Install the shortest (0.442 in.) (1.122 cm) dial indicator contact point on dial indicator group. (10) Install dial indicator group on injector to be synchronized. 4-6