TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 204 of 1434
TM 9-2320-366-34-2 3-134 Change 2 3-23. EXHAUST MANIFOLD REPLACEMENT (CONT) (3) Remove 12 screws (6), shims (7) and exhaust manifold (8) from cylinder head (9). (4) Remove three gaskets (10) from cylinder head (9). Discard three gaskets. b. Installation. (1) Apply antiseize compound to threads of 12 screws (1). (2) Apply sealant to two manifolds (2 and 3). (3) Install two manifolds (2 and 3) in exhaust manifold (4). (4) Position gasket (5), exhaust manifold (4), and two manifolds (2 and 3) on cylinder head (6) with retaining ring (7) and two screws (1). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Perform steps (3) and (4) on exhaust manifolds equipped with shims. NOTE Perform steps (2) through (6) on exhaust manifolds equipped with retaining rings.