TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 203 of 1434
TM 9-2320-366-34-2 Change 2 3-133 3-23. EXHAUST MANIFOLD REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Turbocharger removed (para 4-6). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Gasket (3) (Item 40, Appendix F) Compound, Antiseize (Item 12, Appendix C) Ring, Retaining (Item 361, Appendix F) Ring, Retaining (5) (Item 362, Appendix F) Sealant (Item 65, Appendix C) a. Removal. (1) Remove 12 screws (1), six retaining rings, (2) and exhaust manifold (3) from cylinder head (4). Discard retaining rings. (2) Remove three gaskets (5) from cylinder head (4). Discard three gaskets. NOTE • Vehicles are equipped with two different exhaust manifolds. Exhaust manifolds are equipped with retaining rings or shims. Both exhaust manifolds fit all engines. Hardware is not interchangeable. • Perform steps (1) and (2) on exhaust manifolds equipped with retaining rings.