TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 192 of 1434
TM 9-2320-366-34-2 3-20. AIR INLET ELBOW REPLACEMENT This task covers: a. Removal b. Installation c. Follow-on Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Turbocharger to charge air cooler tubes and hoses removed (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Pan, Drain (Item 43, Appendix B) Wrench Set, Crowfoot Ratcheting (TM 9-2320- 366-20) Materials/Parts Gasket (Item 37, Appendix F) a. Removal. (1) Remove radiator cap (1) from radiator overflow tank (2). (2) Place drain pan under radiator draincock (3). (3) Open radiator draincock (3) and drain approximately one gallon (3.8 liters) of coolant from radiator (4). (4) Close radiator draincock (3). (5) Disconnect heater tube (5) from fitting (6). 3-122