TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 185 of 1434

TM 9-2320-366-34-2 b. Installation. (1) Position oil pump (1) on engine (2) with two lockwashers (3) and screws (4). (2) Tighten two screws (4) to 33-47 lb-ft (45-64 N m). (3) Position two preformed packings (5) and oil discharge tube (6) on oil pump (1) with two screws (7). (4) Tighten two screws (7) to 15-25 lb-ft (20-34 N m). (5) Position gasket (8) and oil pickup tube (9) on oil pump (1) with two washers (10) and screws (11). (6) Tighten two screws (11) to 15-25 lb-ft (20-34 N m). (7) Position two washers (12) and screws (13) in oil pick-up tube bracket (14). (8) Tighten two screws (13) to 15-25 lb-ft (20-34 N m). c. Follow-On Maintenance. (1) Install oil pan (para 3-16). (2) Fill engine with oil (TM 9-2320-366-10-1). (3) Lower cab (TM 9-2320-366-10-1). (4) Start engine (TM 9-2320-366-10-1). (5) Check oil pressure (TM 9-2320-366-10-1). (6) Check oil pan for oil leaks. (7) Shut down engine (TM 9-2320-366-10-1). End of Task. 3-115