TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 184 of 1434
TM 9-2320-366-34-2 3-17. OIL PUMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-on Maintenance INITIAL SETUP Equipment Conditions Oil pan removed (para 3-16). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Tools and Special Tools (Cont) Gloves, Rubber (Item 26, Appendix B) Materials/Parts Gasket (Item 47, Appendix F) Packings, Preformed (2) (Item 251, Appendix F) Lockwasher (Item 162, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) WARNING Wear appropriate eye protection when working under vehicle. Falling debris may cause eye injury. Failure to comply may result in injury to personnel. a. Removal. (1) Remove two screws (1) and washers (2) from pick-up tube bracket (3). (2) Remove two screws (4), washers (5), oil pick-up tube (6), and gasket (7) from oil pump (8). Discard gasket. (3) Remove two screws (9), oil discharge tube (10), and two preformed packings (11) from oil pump (8). Discard preformed packings. (4) Remove two screws (12), lockwashers (13), and oil pump (8) from engine (14). Discard lockwashers. 3-114