TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 178 of 1434
TM 9-2320-366-34-2 3-16. OIL PAN REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-3220-366-10-1). Coolant drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-300 lb-in. (Item 95, Appendix B) Container (Capacity 25 qt (24 L) Hammer, Hand, Soft Head (Item 33, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Packing, Preformed (Item 248, Appendix F) Gasket (Item 34, Appendix F) Packing, Preformed (Item 259, Appendix F) Cap and Plug Set (Item 17, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Cement, Gasket (Item 34, Appendix C) Sealing Compound (Item 74, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Position container under drain plug (1). (2) Remove drain plug (1) from oil pan (2). (3) Remove preformed packing (3) from drain plug (1). Discard preformed packing. 3-108