TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 162 of 1434
TM 9-2320-366-34-2 3-12. ROCKER ARM AND PUSH ROD REPLACEMENT/REPAIR (CONT) d. Assembly. NOTE • Lubricate with lubricating oil all parts prior to assembly. • Valve adjustment screws are installed from bottom side of rocker arms. (1) Position two valve adjustment screws (1) in rocker arms (2 and 3). (2) Install two jam nuts (4) on valve adjustment screws (1). NOTE Injector adjustment screw is installed from bottom side of unit arm. (3) Position injector adjustment screw (5) in unit arm (6). (4) Position jam nut (7) on injector adjustment screw (5). (5) Install retainer ring (9) and arm button (8) on unit arm (6). (6) Install rocker arm (2) on shaft arm (10). (7) Install unit arm (6) on shaft arm (10). (8) Install rocker arm (3) on shaft arm (10). (9) Install shaft support (11) on shaft arm (10). 3-92