TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 157 of 1434
TM 9-2320-366-34-2 WARNING Flywheel housing weighs approximately 75 lbs (34 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (5) through (8) require the aid of an assistant. (5) Position flywheel housing (2) on engine (5). (6) Position bolt (6) in flywheel housing (2). (7) Position 10 self-locking screws (7) in flywheel housing (2). (8) Position two bolts (8) in flywheel housing (2). (9) Tighten 10 self-locking screws (7) to 98-144 lb-ft (130- 190 N·m). (10) Tighten two bolts (8) to 33-47 lb-ft (45-65 N·m). (11) Tighten bolt (6) to 156-276 lb-in. (18-31 N·m). c. Follow-On Maintenance. (1) Install oil pan (para 3-16). (2) Install crankshaft rear seal (para 3-9). (3) Install flexplate (para 3-10). (4) Install engine (para 3-3). (5) Install engine speed sensor (TM 9-2320-366-20-3). (6) Install starting motor (TM 9-2320-366-20-3). End of Task. Change 1 3-88.1/(3-88.2 Blank)