TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 156 of 1434
TM 9-2320-366-34-2 3-11. FLYWHEEL HOUSING REPLACEMENT (CONT) (4) Remove plug (6) from port on top of flywheel housing (2). (5) Remove plug (7) from each side of flywheel housing (2). (6) Remove fitting (8) from flywheel housing (2). b. Installation. (1) Install plug (1) on left and right side of flywheel housing (2). (2) Install plug (3) on top of flywheel housing (2). (3) Install fitting (4) in flywheel housing (2). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply sealant to seating area between and around all mounting holes. 3-88 Change 1