TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 153 of 1434
TM 9-2320-366-34-2 (3) Remove hub adapter (5) from crankshaft (6). b. Installation. (1) Position hub adapter (1) on crankshaft (2). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Perform steps (2) through (4) on engines with balance plate removed. (2) Apply sealing compound to the threads of eight bolts (3). (3) Position flexplate assembly (4) and three flexplates (5) on hub adapter (1) with plate (6) and eight bolts (3). (4) Tighten eight bolts (3) to 76-94 ft-lb (103-127 N m). 3-85