TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 145 of 1434
TM 9-2320-366-34-2 3-8. CRANKSHAFT FRONT SEAL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance. INITIAL SETUP Equipment Conditions Pulley damper removed (para 3-7). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Inserter, Seal (TM 9-2320-366-20) Drill, Portable Electric (Item 21, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gage, Belt Tension (TM 9-2320-366-20) Puller Kit, Universal (Item 50, Appendix B) Caliper, Vernier (Item 11, Appendix B) Tools and Special Tools (Cont) Drill Set, Twist (Item 20, Appendix B) Materials/Parts Lubricating Oil, Engine (Item 46, Appendix C) Soap, Laundry (Item 81, Appendix C) Seal, Plain Encased (Item 387, Appendix F) Excluder (Item 31, Appendix F) Personnel Required (2) a. Removal. (1) Loosen screws (1 and 2) on bracket (3). (2) Remove water pump belt (4) from pulley (5). (3) Remove four screws (6), plate (7), and pulley (5) from crankshaft (8). (4) Remove excluder (9) from pulley (5). Discard excluder. 3-77