TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 144 of 1434
TM 9-2320-366-34-2 3-7. PULLEY DAMPER REPLACEMENT (CONT) b. Installation. CAUTION Damper is easily damaged and must be handled carefully. Failure to comply may result in damage to equipment. NOTE Step (1) requires the aid of an assistant. (1) Position pulley (1), damper (2), and adapter (3) on crankshaft pulley (4) with eight washers (5) and screws (6). (2) Tighten eight screws (6) to 33-47 lb-ft (45-65 N·m). (3) Install two alternator drive belts (7) on engine. CAUTION Steps (4) and (5) must be accomplished while maintaining belt tension. Failure to comply may result in damage to equipment. NOTE Tension adjustment for new belt is 115-125 lbs (52-57 N). For reinstalled belt 85-95 lbs (39-43 N). (4) Adjust belt tension with idler pulley (8). (5) Tighten two screws (9) to 43-51 lb-ft (58-69 N·m). c. Follow-On Maintenance. (1) Install engine fan and fan clutch (TM 9-2320-366-20-3). (2) Start engine check for proper operation (TM 9-2320-366- 10-1). (3) Shut down engine (TM 9-2320-366-10-1). End of Task. 3-76