TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 143 of 1434
TM 9-2320-366-34-2 3-7. PULLEY DAMPER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance. INITIAL SETUP Equipment Conditions Engine fan and fan clutch removed (TM 9-2320-366- 20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Tools and Special Tools (Cont) Gage, Belt Tension (TM 9-2320-366-20) Adapter, Socket Wrench (Item 3, Appendix B) Socket Wrench Attachment, Screwdriver (Item 62, Appendix B) Personnel Required (2) a. Removal. (1) Loosen two screws (1) on idler pulley (2). (2) Remove two alternator belts (3) from engine. CAUTION Damper is easily damaged and must be handled carefully. Failure to comply may result in damage to equipment. (3) Remove eight screws (4), washers (5), adapter (6), damper (7), and pulley (8) from crankshaft pulley (9). 3-75