TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 142 of 1434
TM 9-2320-366-34-2 3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT) (21) Install preformed packing (24) on 90-degree fitting (6). (22) Install fuel tube (25) on 90-degree fitting (6). (23) Install clamp (26), washer (27), and screw (28) on cylinder head (4). d. Follow-On Maintenance. (1) Install exhaust manifold (para 3-23). (2) Install thermostat housing (TM 9-2320-366-20-3). (3) Install fuel injectors (para 4-2). (4) Install fuel control linkage (para 4-7). (5) Install rocker arms and pushrods (para 3-12). (6) Install orifice tube assembly (TM 9-2320-366-20-3). (7) Install fuel filter base (TM 9-2320-366-20-3). (8) Install inlet manifold (para 3-22). (9) Fill radiator with coolant (TM 9-2320-366-20). (10) Prime vehicle fuel system (TM 9-2320-366-10-1). (11) Lower cab (TM 9-2320-366-10-1). (12) Start engine (TM 9-2320-366-10-1). (13) Check oil pressure (TM 9-2320-366-10-1). (14) Check for excessive smoke from tailpipe. (15) Ensure engine runs smoothly. (16) Raise cab (TM 9-2320-366-10-1). (17) Check for evidence of oil or coolant leakage around cylinder head. (18) Lower cab (TM 9-2320-366-10-1). (19) Shut down engine (TM 9-2320-366-10-1). End of Task. 3-74