TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 140 of 1434
TM 9-2320-366-34-2 3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT) (3) Install preformed packing (5) on 90-degree fitting (6). (4) Install 90-degree fitting (6) in cylinder head (4). (5) Install preformed packing (7) on 90-degree fitting (8). (6) Install 90-degree fitting (8) in cylinder head (4). (7) Install front lifting eye bracket (9) on cylinder head (4) with four washers (10) and screws (11). (8) Install rear lifting eye bracket (12) on cylinder head (4) with five washers (13) and screws (14). WARNING Cylinder head weighs approximately 150 lbs (68 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (9) requires the aid of an assistant. (9) Position gasket (15) and cylinder head (4) on cylinder block (16). 3-72