TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 131 of 1434

TM 9-2320-366-34-2 3-5. ENGINE BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Air compressor removed (para 11-2) (left mount support). 100 amp alternator removed, if equipped (TM 9-2320-366-20-3) (right mount support). 200 amp alternator removed, if equipped (TM 9-2320-366-20-5) (right mount support). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Nut, Self-locking (Item 210, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Perform step (1) on right engine bracket. (1) Remove two screws (1) and washers (2) from alternator support bracket (3). WARNING Engine weighs approximately 1500 lbs (681 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in serious injury or death to personnel or damage to equipment. CAUTION Do not lift engine at this time. Failure to comply may result in damage to equipment. (2) Take up slack with lifting device. 3-63