TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 127 of 1434
TM 9-2320-366-34-2 3-4. ENGINE FRONT RESILIENT MOUNT AND MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Sling, Engine and Transmission, Motor Vehicle (Item 57, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Nut, Self-locking (2) (Item 207, Appendix F) Nut, Self-locking (3) (Item 210, Appendix F) Mount, Resilient (Item 168, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. WARNING Engine weighs approximately 1500 lbs (681 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in serious injury or death to personnel or damage to equipment. CAUTION Raise engine enough to remove pressure from mounts. Failure to comply may result in damage to equipment. (1) Raise engine (1). 3-59