TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1249 of 1434
TM 9-2320-366-34-2 D-42. D-42. WOODEN WOODEN SKID SKID FABRICATION FABRICATION 12420036 12420036 Cut, shape and drill the wooden skid from bulk wood stock according to the following information. Figure D-57. Wooden Skid illustrates the dimensions and hole locations. Figure D-57. Wooden Skid a. All dimensions are in inches (centimeters). b. Fabricate (1) from MIL-STD 736 Group IV untreated bulk wood stock as illustrated in Figure D-57. Wooden Skid. c. Drill 0.625 inch (1.58 cm) diameter hole 2 places as shown in Figure D-57. Wooden Skid. d. Sand and remove sharp edges. e. Mark 19207-12420036 with characters 0.25 inch (0.65 cm) high using ink TT-I-1795 where shown in Figure D-57 Wooden Skid and clear coat with lacquer per TT-L-50. D-71 D-71