TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1214 of 1434
TM 9-2320-366-34-2 D-20. SPANNER WRENCH TOOL (CONT) Figure D-30. Spanner Wrench Jaw a. Shape spanner jaw (2) as shown in Figure D-30. Spanner Wrench Jaw. b. Drill 0.25 in. (6.35 mm) and 0.39 in. (10.0 mm) diameter holes through as shown in Figure D-29. Spanner Wrench Jaw. c. De-burr and remove sharp edges. Figure D-31. Spanner Wrench Handle Piece a. Shape spanner handle piece (1) the same as (2) except as shown in Figure D-31. Spanner Wrench Handle Piece. b. Drill 0.25 in. (6.35 mm) and 0.39 in. (10.0 mm) diameter holes through as shown in Figure D-31. Spanner Wrench Handle Piece. c. Cut slot in handle (4) as shown in Figure D-31 Spanner Wrench Handle Piece. d. De-burr and remove sharp edges. D-36 D-36