TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 1199 of 1434

TM 9-2320-366-34-2 D-7. DUMP BODY CAB PROTECTOR PIVOT PIN REMOVAL TOOL Make the dump body cab protector pivot pin removal tool from 0.50 inch (1.3 cm) round steel stock according to the following figures. Refer to the parts list and figure for details. Item Part Number Material Description Size Qty 1 N/A Steel, Round Bar 108.0 in. (274.3 cm) x 0.50 in. (1.3 cm) OD 1 2 N/A Steel, Round Bar 5.00 in. (13 cm) x 0.50 in. (1.3 cm) OD 1 Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly a. All dimensions are in inches (centimeters). b. Position and clamp (1) and (2) pieces together as shown by dimensions in Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly. c. Weld (1) to (2) as identified on assembly table and shown in Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly. d. Weld both sides indicated in Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly. e. De-burr and remove sharp edges. D-21 D-21