TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1187 of 1434
TM 9-2320-366-34-2 D-4. CAB MAINTENANCE STAND Make the cab maintenance stand from steel plate, 2 inch by 4 inch and 4 inch by 4 inch lumber, and bolts, nuts and washers according to the following instructions. Refer to the parts list tables and figures Figure D-4. Cab Maintenance Stand Angle Brackets and Straight Brackets, Figure D-5. Cab Maintenance Stand Base Angle Bracket Locations, Figure D-6. Cab Maintenance Stand Base Fabrication, Figure D-7. Cab Maintenance Stand Brace Bracket Locations, Figure D-8. Cab Maintenance Stand Brace to Base Assembly, Figure D-9. Cab Maintenance Stand Brace to Base Assembly, and Figure D-10. Cab Maintenance Stand Assembly for details. Item No. Item Description Size or Dimension Material Description Qty 1 Base, LH, RH 51½ x 3½ x 3½ 4X4 in. Lumber (MIL- STD-731) 2 2 Base Feet 10½ x 3½ x 3½ 4x4 in. Lumber 4 3 Base Spreaders 41 x 3½ x 1½ 2x4 in. Lumber 6 4 Brace, Mid, and Front Supports 15½ x 3½ x 3½ 4x4 in. Lumber 4 5 Brace, Rear Support 25 x 3½ x 3½ 4x4 in. Lumber 2 6 Support, Rear, Front, Middle 41 x 3½ x 3½ 4x4 in. Lumber 3 7 Brace Spreaders 44½ x 3½ x 1½ 2x4 in. Lumber 2 8 Pads 6 x 3½ x 1½ 2x4 in. Lumber 4 9 Bracket, Angle 3½ x 3½ x 1/8 1/8 in. Steel Angle Stock 6 10 Bracket, Straight 5½ x 3½ x 1/8 1/8 in. Steel Plate Stock 6 11 Bolt, 3/8 X 4 in. Carriage, NC 24 12 Bolt, 3/8 X 10 in. Carriage, NC 24 13 Washer, Flat, 3/8 in. 48 14 Lockwasher, 3/8 in. 48 15 Nut, Hex, 3/8 in. 48 D-9 D-9