TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1151 of 1434
TM 9-2320-366-34-2 d. Rear Axle Shock Absorber Rear Bracket Installation. NOTE • Left and right side rear axle shock absorber rear brackets are installed the same way. Right side shown. • Steps (1) through (3) require the aid of an assistant. (1) Position rear axle shock absorber rear bracket (1) on frame rail (2) with bolt (3) and self-locking nut (4). (2) Position bolt (5) and self-locking nut (6) in rear axle shock absorber rear bracket (1). (3) Tighten self-locking nuts (4 and 6) to 210-225 lb-ft (285- 305 N·m). NOTE Perform steps (4) and (5) on vehicle serial numbers 1399 through 2987. (4) Position rear axle shock absorber (7) in two rear axle shock absorber brackets (1) with three washers (8), bolt (9), and self-locking nut (10). (5) Tighten self-locking nut (10) to 195-239 lb-ft (264-324 N·m). NOTE Perform steps (6) and (7) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (6) Position rear axle shock absorber (7) in two rear axle shock absorber brackets (1) with washer (11), bolt (9), and self-locking nut (10). (7) Tighten self-locking nut (10) to 195-239 lb-ft (264-324 N·m). 14-47