TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1146 of 1434
TM 9-2320-366-34-2 14-9. REAR AXLE SHOCK ABSORBER BRACKET REPLACEMENT This task covers: a. Rear Axle Shock Absorber Front Bracket Removal b. Rear Axle Shock Absorber Front Bracket Installation c. Rear Axle Shock Absorber Rear Bracket Removal d. Rear Axle Shock Absorber Rear Bracket Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Underlift lowered (M1089) (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Tools and Special Tools (Cont) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Bolt (Item 5, Appendix F) Bolt (Item 6, Appendix F) (front bracket) Bolt (Item 7, Appendix F) (rear bracket) Nut, Self-locking (3) (Item 229, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Rear Axle Shock Absorber Front Bracket Removal. NOTE • Left and right side rear axle shock absorber front brackets are removed the same way. Right side shown. • Perform step (1) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (1) Remove self-locking nut (1), bolt (2), and washer (3) from rear axle shock absorber (4). Discard self-locking nut. 14-42