TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1142 of 1434
TM 9-2320-366-34-2 14-8. INTERMEDIATE AXLE SHOCK ABSORBER BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Tools and Special Tools (Cont) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Bolt (2) (Item 6, Appendix F) Nut, Self-locking (3) (Item 229, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Left and right side intermediate axle shock absorber brackets are removed the same way. Right side shown. • Front and rear intermediate axle shock absorber brackets are removed the same way. Rear one shown. • Perform step (1) on vehicle serial numbers 0001 through 1398 and 2988 and higher serial numbers. (1) Remove self-locking nut (1), bolt (2), and washer (3) from intermediate axle shock absorber (4). Discard self- locking nut. 14-38