TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1135 of 1434
TM 9-2320-366-34-2 CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (16) Remove collar (29) and bolt (30) from angle bracket (31). Discard collar and bolt. (17) Remove two bolts (32), angle bracket (31) and front spring rear bracket (19) from frame rail (33). d. Front Spring Rear Bracket Installation. (1) Position angle bracket (1) on frame rail (2) with bolt (3) and self-locking nut (4). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (2) Apply sealing compound to threads of two bolts (5). (3) Position front spring rear bracket (6) on angle bracket (1) with two bolts (5). (4) Tighten two bolts (5) to 195-240 lb-ft (265-325 N·m). (5) Tighten self-locking nut (4) to 210-225 lb-ft (285-305 N·m). 14-31