TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1124 of 1434
TM 9-2320-366-34-2 14-5. REAR TORQUE ROD REPLACEMENT This task covers: a. Removal b. Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Rear wheels removed (side being worked) (TM 9-2320- 366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Jack, Dolly Type (Item 37, Appendix B) Goggles, Industrial (Item 28, Appendix B) Tools and Special Tools (Cont) Trestles, Motor Vehicle Maintenance (2) (Item 81, Appendix B) Multiplier, Torque Wrench (Item 42, Appendix B) Bar, Wrecking (Item 6, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Materials/Parts Nut, Self-Locking (2) (Item 239, Appendix F) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Left and right side torque rods are removed the same way. Left side shown. (1) Raise rear of truck on left side of vehicle and place trestles under frame. (2) Remove two self-locking nuts (1) from torque rod (2). Discard self-locking nuts. (3) Remove torque rod (2) from mounting bracket (3) and axle (4). 14-20