TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 1116 of 1434

TM 9-2320-366-34-2 14-3. FRONT LEAF SPRING SHACKLE AND PIN REPLACEMENT (CONT) CAUTION • Use care when installing pin to prevent damage to lubrication fitting hole threads. Failure to comply may result in damage to equipment. • Ensure spring pin is positioned so grove faces slot in rear shackle. Failure to comply may result in damage to equipment. NOTE • Step (5) requires the aid of an assistant. • Lubricate spring pin prior to installation. (5) Install leaf spring (9) on shackle (2) with spring pin (10). (6) Install lubrication fitting (11) in spring pin (10). (7) Position screw (12) and self-locking nut (13) in rear bracket (3). (8) Tighten self-locking nut (13) to 76-94 lb-ft (103-127 N·m). NOTE • Perform steps (9) and (10) on RH side of vehicle. • Steps (9) and (10) require the aid of an assistant. (9) Position exhaust pipe (14) on muffler (15) and engine exhaust extension (16). (10) Tighten two nuts (17) on clamps (18) to 73-126 lb-in (8- 14 N·m). 14-14 Change 1