TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1112 of 1434
TM 9-2320-366-34-2 14-3. FRONT LEAF SPRING SHACKLE AND PIN REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Hydraulic reservoir removed, if equipped (left side) (TM 9-2320-366-20-5). Gravel deflector and gravel deflector extension removed (TM 9-2320-366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Jack, Dolly Type, Hydraulic (Item 37, Appendix B) Tools and Special Tools (Cont) Trestles, Motor Vehicle Maintenance (2) (Item 81, Appendix B) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Nut, Self-locking (2) (Item 235, Appendix F) Grease, Automotive and Artillery (Item 36, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Deleted (2) Deleted (3) Remove wheel on side that spring is being removed (TM 9-2320-366-10-1). 14-10 Change 1