TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 111 of 1434
TM 9-2320-366-34-2 (68) Position heater hose (83) on tube (84) with clamp (85). (68.1) Tighten clamp (85) to 12-18 lb-in. (1-2 N·m). (69) Remove two screws (86) and washers (87) from inlet manifold (27). (70) Position two clamps (88) on inlet manifold (27) with two washers (87) and screws (86). (71) Tighten two screws (86) to 15-25 lb-ft (20-34 N·m). (72) Remove screw (89) and washer (90) from air inlet elbow (91). (73) Position clamp (92) on air inlet elbow (91) with washer (90) and screw (89). (74) Tighten screw (89) to 15-25 lb-ft (20-34 N·m). Change 1 3-45