TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1109 of 1434
TM 9-2320-366-34-2 Change 2 14-7 (17) Install leaf spring (1) in front bracket (16) with spring pin (17). (18) Install lubrication fitting (18) in spring pin (17). (19) Position bolt (19) and nut (20) in front bracket (16). (20) Tighten self-locking nut (20) to 76-94 lb-ft (103-127 N•m). (21) Position cab tilt cylinder (21) on bracket (22). (22) Install washer (23) and cotter pin (24) in cab tilt cylinder (21). NOTE • Position spring pin so groove faces slot in bracket. • Lubricate spring pin before installation. • Step (17) requires the aid of an assistant. NOTE Perform steps (21) through (24) on RH side of vehicle.