TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1089 of 1434
TM 9-2320-366-34-2 Change 2 13-429 (3) Postion channel rail reinforcement (4) on frame rail (5) with four self-locking nuts (6) and bolts (7). (4) Tighten self-locking nuts (6) to 210-225 lb-ft (285- 305 N•m). (5) Cut two plastic edges (8) to approximately 9 in. (23 cm). (6) Apply adhesive to plastic edge (8). (7) Install plastic edge (8) on support bracket (9). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.