TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1083 of 1434
TM 9-2320-366-34-2 WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (9) Apply sealant to threads of three bolts (6) and bolt (1). CAUTION Do not use pneumatic wrench to install bolts. Thread damage will occur. Failure to comply may result in damage to equipment. (10) Position three bolts (6) in support (2). (11) Tighten three bolts (6), bolt (1), and two bolts (5) to 398- 486 lb-ft (540-660 N·m). (12) Position bracket (7) on V-rod control arm (3) with two U- bolts (8), four spacers (9), washers (10), and nuts (11). (13) Tighten four nuts (11) to 14-18 lb-ft (20-24 N·m). e. Follow-On Maintenance. Install driveshaft (TM 9-2320-366-20-4). End of Task. Change 2 13-423