TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1081 of 1434
TM 9-2320-366-34-2 CAUTION Do not use pneumatic wrench to remove bolts. Thread damage will occur. Failure to comply may result in damage to equipment. (3) Remove three bolts (7) from support (8). (4) Loosen bolt (9) from support (8). NOTE Left and right upper end of V-rod control arm are removed the same way. Left side shown. (5) Remove two-bolts (10) from V-rod control arm (6). (6) Perform step (5) on right side. NOTE Step (7) requires the aid of an assistant. (7) Remove V-rod control arm (6) from vehicle. (8) Match mark V-rod control arm (6) and support (8). (9) Position V-rod control arm (6) in vise. (10) Remove self-locking nut (11) and support (8) from V-rod control arm (6). Discard self-locking nut. (11) Remove bolt (9) from support (8). Change 1 13-421